Warning: Illegal string offset 'w' in /home3/lzzpjumy/public_html/COMAXTOOLCOM/administrator/components/com_phocagallery/libraries/phocagallery/image/image.php on line 52

Warning: Illegal string offset 'h' in /home3/lzzpjumy/public_html/COMAXTOOLCOM/administrator/components/com_phocagallery/libraries/phocagallery/image/image.php on line 53
Back To Category

Notice: Only variables should be assigned by reference in /home3/lzzpjumy/public_html/COMAXTOOLCOM/plugins/content/phocagalleryslideshow/phocagalleryslideshow.php on line 37

Notice: Only variables should be assigned by reference in /home3/lzzpjumy/public_html/COMAXTOOLCOM/plugins/content/phocagalleryslideshow/phocagalleryslideshow.php on line 38
Diamond Paste
 
Diamond Paste -

Applicable Objects

All kinds of precision molds of the mirror polishing surface treatment in different areas like Aerospace / automotive / information / electronic / ceramic / optical / medical / laser / machinery etc...

   The selection of diamond grinding paste is mainly based on the requirements of the finish of the work piece and the efficiency of the machining and the original finish of the work piece. Larger margin, the requirements of high processing efficiency, can be used to select a coarser size number; smaller margin, high degree of finish, you can choose a more fine-grained,the general rough grinding, fine grinding according to the requirements of the work piece finish can refer to the following table:

granularity

color

category

Degree of-finish

New standard

Old standard

W0.5

light yellow

Water or oil

▽13~14

0.012~0.006

W1.0

yellow

Water or oil

▽13~14

0.012~0.006

W1.5

tangerine

Water or oil

▽12~13

0.025~0.012

W2.5

Rose pink

Water or oil

▽12~13

0.025~0.012

W3.5

Vermeilion

Water or oil

▽12~13

0.025~0.012

W5.0

Emerald blue

Water or oil

▽11~12

0.05~0.025

W7

Brilliant blue

Water or oil

▽11~12

0.05~0.025

W10

Grass green

Water or oil

▽10~11

0.1~0.05

W14

green

Water or oil

▽10~11

0.1~0.05

W20

purple

Water or oil

▽9~10

0.2~0.1

W28

Grey

Water or oil

▽9~10

0.2~0.1

W40

Black

Water or oil

▽9~10

0.2~0.1

Matters Need Attention

    According to the material and processing requirements of the workpiece, select the appropriate grinding device and grinding paste.Commonly used grinding machine is glass, cast iron, steel, aluminum, organic glass and other materials made of blocks and plates, thinner water soluble grinding paste water or glycerin; oil soluble grinding paste with kerosene.

  • Diamond grinding is a kind of precision machining, processing requirements of environment and tools are clean in the use of tools for each size special, no mixing.
  • In the process of changing with different size of the grinding paste must be cleaned before the workpiece, so as to avoid the rough particles of the former process into the fine grained grinding paste scratch the workpiece.
  • When using the a few grinding paste squeeze into the container or squeeze directly on the grinding device, water, glycerin or kerosene were diluted, the general water gypsum ratio of 1:1, can also according to the use of the site to adjust and fine only need to add a small amount of water, with the particle size increase crude amount of addition of glycerol.
  • After finishing the work, the work piece should be cleaned with gasoline, kerosene or water.
Previous Image
Stop Slideshow
Start Slideshow
Refresh
Powered by Phoca Gallery